Model Range




The escape, the freedom of mind, go park-up enjoy, bring the luxury you demand with you leave the heartache at home. When you are away afford those little extras you deserve. Glamping is here to stay with the Escape, but don't go too far or you won't want to come back.


Standard features - Exterior

One piece moulded composite body
Flush reverse hat double glassed units (Dark)
Anti-Snaking Device hitch
One Action Easy Handbrake
Alloy Wheels with full size automotive tyres 225/70/16
Large rear opening door allowing full access manual system
Built in awning to underside of rear door with 3 pod attachment points
In roof opener with fitted blind and fly screen manual operation
Gas Locker to hold a variety of bottles
(EN1645-I) Grade 3 Classification for Thermal Insulation & Heating

Exterior body colour choice solid colour see chart
Built in roof rail system to support Tripbuddy roof bars Painted
Substantial front and rear positioning handles Steel painted
LED road lights**2
4 wheel Axle system braked to all wheels
Dampers (shock absorbers) to all wheels
Water connection system
Mains electrical connection point
Connection to vehicle by 7 or EU 13 pin connector
Body stays at each corner
**2 Indicators are standard bulbs

Standard features - Interior

The interior is water proof and acts as a wet room for cleaning
Soft Fabric Headliner
E-leather wall covering
Cushions in the saloon area faced in E-leather
All interior units are made from composite GRP materials
Transparent Tambour Style Unit Doors
Wood effect nonslip flooring

Bed is supported by a super strong T-BS2 system
Thermal divider curtain Zipped at rear of the body between body and tent with porthole window
Pop blinds
Freestanding table (also acts as bed)
3 LED reading lights
LED Spot light in rear door switched on when door is open and tent deployed
LED bathroom light to IP68


The Tripbuddy Bathroom zone is an expanding area fitted with shower and toilet, it deploys when being used by the two pivoting screens and folds away when not required it can be accessed from the tent area or from the main body
Shower with Dedicated Controls
LED IP68 switchable light


Water heater (4KW)
Cabin Blown air heater with thermostatic control (4KW)

Cooking Zone

3 Burner Hob
Ample storage for cooking utensils
Fridge with freezing compartment
Stainless Steel Sink with Hot / Cold Tap

Infotainment Zone

Built in multi function infotainment system
4 x 2 way speaker system with additional tweeters

Power & Energy

Gas Locker to hold a variety of bottles
12 Volt Charger and Mains Transformer *1
Colour Co-ordinated 230v Mains Sockets *1
Mains Inlet with ELCB Protection
Tripbuddy control panel operating and controlling all electrical systems
*1 110v option for US

Security & Safety

Body stays at each corner
CRIS Identity Etched onto Windows
One Key fits ALL locks
Smoke and CO2 Alarm
Hidden Identity Tag

Optional Extras


Locking wheel nuts for road wheels
Mud flaps
Roof bars for loads up to 100kg
Roof box "Thule Dynamic"
Canoe rack
Roof system access ladder
Alloy spare wheel and front carrier
Pump and tyre seal/ repair kit
Pup tents for attachment to the rear door LH and RH these are adequate for 2 to 3 person occupancy
Inner tent for above (2 person)
Auto deploy corner stays and levelling system
Power Opening Rear Door
Solar panels set on roof and rear door

Cooking Zone

Built in coffee maker
Built in microwave


Interior & body colours see colour chart



Kerb weight or MIRO*
1200kg ^^^

MTPLM = maximum technical permissible laden mass (pre 1998 it was known as MGW maximum gross weight), was in the maximum the Tripbuddy can weigh with all your items inside it.

MIRO = mass in running order, as in the weight of the caravan with no additions e.g. gas bottles.

* The MTPLM and MIRO figures of Your Tripbuddy will depend on Specification and will appear on your contract and on the data tag attached to the VIN number

^^^weights may vary depending on final spec